|
|
|
|
The field proven Rugged Systems™ Power Distribution Unit (PDU) line is ideally suited for military, industrial and telecommunications applications requiring a rugged rack, vehicular or field deployable, high reliability, compact size and light weight design. The heavy-duty chassis occupies only 1U (1.75”) of rack space while controlling up to 3600 VA of power via four double pole controls. The rounded metal corners aid in safe handling. Internally, all major components are well secured and electrically insulated to prevent damage due to shock and vibration. All controls and protective devices are brought to the front panel with critical switches or breakers guarded to prevent damage or accidental operation.
The double pole input breaker provides overload and short circuit protection for the whole unit. The PDU allows control of the individual output circuits. The optional Emergency Power Off (EPO) function can remotely open the input circuit breaker. Each load is controlled and protected by a double pole shock rated circuit breakers avoiding accidental operation due to shock or vibration. The indicator arrays keep the operator informed as to the unit's status. The elapsed time hour meter tracks the rack equipment operation for maintenance.
The rear panel provides locking connectors for the input power, output power and fan power. The combination MS input connector and input EMI/RFI filter provides suppression of conducted EMI. The transient surge suppression helps further protect the connected equipment.
Overall, the PowerStation product line is uniquely qualified for critical shipboard, vehicle, airborne or land based systems combining advanced modular design features with highly reliable construction.
Technical Specifications:
P/N: ETI0003-1175
NSN: 6110-01-526-0503
| AC INPUT FROM RACK | |
| PDU input from rack: | 120 VAC nominal, optional up to 600 VAC |
| INPUT MAIN (J1) connection: | MS3102E20-19P, 3 pin locking |
| Input control/protection: | Guarded 2 pole, 30 amp circuit breaker |
| Input power indicator: | Green neon lamp |
| AC OUTPUT TO FANS | |
| PDU output to fans: | Same as input from rack |
| AC TO FANS (J4) connection: | NEMA 5-15R with cable locking bale |
| POWER DISTRIBUTION | |
| PDU output voltage to loads: | Same as input from rack |
| Output rating to loads: | Limited to lesser of 15 amps or 30 amps total |
| Output circuits: | Four controlled outputs w/2 pole circuit breakers |
| LOADs (J5-J8) | NEMA 5-15R with cable locking bale |
| MECHANICAL | |
| Dimensions ( H x D x W ): | 1.75 (1U) x 14.9 x 19.0 in (44x378x483mm) |
| Rack Slide Mount Patterns: | Slides or rear support mounting brackets |
| Alternate Mounting Options: | Table, Wall, Floor, Portable, Horizontal/Vertical |
| Shipping weight: | 20 lb. (9.1 kg) with lift handles front |
| Audible noise: | Less than 47 dB @ 5.0 ft., ANSI "A" scale |
| Cooling type: | Convection cooling |
| ENVIRONMENTAL | |
| Storage temperature: | -13° to 140° F ambient (-25° to 60° C ) |
| Operating temperature: | 32° to 122° F ambient (0° to 50° C ), higher optional |
| Operating humidity: | 0 to 95% relative humidity (non-condensing) |
| Operating elevation: | Up to 15,000 ft (4,572 m), higher optionally |
| STANDARDS | |
| United States: | Meets UL-1778 standard, MIL STDs 901, 167 & 1399 Shock/Vib/Electrical |
| Canada: | CSA C22.2 No. 107 safety requirements |
| EMI Protection: | EMI/RFI FCC, Class B, MIL STDs 461 |
| OPTIONAL ACCESSORIES | |
| Dual Source Input, Emergency Power Off, EMI Insertion Loss Filters, Auxiliary DC Power Supply, MS Connectors, Transient Surge Suppression, Load Sequencing | |
This page was last modified on:
April 07, 2011
Request Information
